keywords
QuickServer Gateway for BACnet, Modbus, Lonworks, SNMP, Metasys N2

  • QuickServer is a high-performance, fully-configurable, cost-effective Building Automation gateway for integrators to easily interface devices to networks in commercial buildings, industrial plants and campuses.
  • FieldServer offers a powerful line of interpretable gateways, which offer a great amount of flexibility in choosing devises for your infrastructure.
  • QuickServer adds to that value by running the same robust FieldServer protocol conversion software on a highly cost effective platform.
  • The user can preselect two BAS drivers (serial, Ethernet and/or LonWorks) to be loaded on the QuickServer.
  • QuickServer is ready to configure for the specific application. All necessary instructions and software are included with QuickServer.

QuickServer Key Features:

  • Ability to interface up to 250 points of common BAS protocols
  • BTL Mark - FS-QS-1010 Series
  • LonMark Certified - FS-QS-1011 Series
  • BACnet COV support for fast data communication while reducing traffic over a BACnet network
  • Capacity of 250 LonWorks network variables - almost 5 times more than competition - FS-QS-1011 Series
  • Multi-configuration capability; specific configurations selectable via DIP switches or software
  • Flat panel mount standard, DIN rail mount option
  • DIP switches to select baud rate or node ID on the fly

 

 

List of protocols supported:

  • LonWorks
  • BACnet MS/TP
  • BACnet IP
  • Metasys N2 by JCI
  • Modbus RTU
  • Modbus TCP
  • SNMP
 
 

 

QuickServer Selection Table

 

BACnet/IP

BACnet MS/TP

Modbus TCP

Modbus RTU

JCI Metasys N2

LonWorks

SNMP

BACnet/IP

FS-QS-1010-0285

FS-QS-1010-0237

FS-QS-1010-0104

FS-QS-1010-0122

FS-QS-1011-0131

FS-QS-1010-0333

BACnet MS/TP

FS-QS-1010-0285

FS-QS-1010-0419

FS-QS-1010-0367

FS-QS-1010-0309

FS-QS-1011-0345

FS-QS-1010-0694

Modbus TCP

FS-QS-1010-0237

FS-QS-1010-0419

FS-QS-1010-0030

FS-QS-1010-0117

FS-QS-1011-0154

FS-QS-1010-0248

Modbus RTU

FS-QS-1010-0104

FS-QS-1010-0367

FS-QS-1010-0030

FS-QS-1010-0038

FS-QS-1011-0085

FS-QS-1010-0334

JCI Metasys N2

FS-QS-1010-0122

FS-QS-1010-0309

FS-QS-1010-0117

FS-QS-1010-0038

FS-QS-1011-0097

FS-QS-1010-0150

LonWorks

FS-QS-1011-0131

FS-QS-1011-0345

FS-QS-1011-0154

FS-QS-1011-0085

FS-QS-1011-0097

FS-QS-1011-0337

SNMP

FS-QS-1010-0333

FS-QS-1010-0694

FS-QS-1010-0248

FS-QS-1010-0334

FS-QS-1010-0150

FS-QS-1011-0337

      • LonWorks is a trademark of Echelon Corporation

 

QuickServer Enhanced:

·      The QuickServer Enhanced offers all the rich benefits of the QuickServer BAS, but can accept up to 500 points, and comes complete with any two Serial or Ethernet drivers available from the extensive FieldServer Driver Library. RS-232 and RS-422 serial output options are also available on the QuickServer Enhanced.

·      FieldServer offers a powerful line of interpretable gateways, which offer a great amount of flexibility in choosing devises for your infrastructure.

·      QuickServer Enhance adds to that value by running the same robust FieldServer protocol conversion software on a highly cost effective platform.

·      The user can preselect two drivers (serial, Ethernet and/or LonWorks) to be loaded on the QuickServer Enhance.

·      QuickServer Enhance is ready to configure for the specific application. All necessary instructions and software are included with QuickServer Enhance.

   QuickServer Enhanced Key Features:

  • Ability to interface up to 500 points of common BAS protocols
  • BTL Mark - FS-QS-121X Series
  • LonMark Certified - FS-QS-12X1 Series
  • BACnet COV support for fast data communication while reducing traffic over a BACnet network
  • Capacity of 500 LonWorks network variables - almost 5 times more than competition - FS-QS-12X1 Series
  • RS-232 or RS-422 serial port options
  • Multi-configuration capability; specific configurations selectable via DIP switches or software
  • External DIP switches and LED lights to aid in easy set-up and operation
  • Flat panel mount standard, DIN rail mount option
  • DIP switches to select baud rate or node ID on the fly