CAN Bus to fiber optic Converter (CAN Bus Point-to-Point Fiber Modem)
The CAN Bus series products provide an optical point-to-point or bus network connection for CAN bus data interfaces on one or two, multimode or singlemode optical fibers. The CAN Bus Point-to-Point Transmission units operate as the end or terminal points and provide an electrical connection and a two fibre optical connection. The units support CAN 1.0 and CAN 2.0 CAN standards, and Device Net. And are transparent to all high level protocols.

This series is available in either wall mount, DIN rail or 3U chassis card configurations.

The HFB-FO-CAN converter can be used in fire alarm system, radar system, security, industrial automation, solar plants and other industrial fields.

Product Features

  • Up to 1Mbps data rate
  • Multimode and single mode
  • Single fiber solution
  • Wall mount, rack or chassis configurations

Data

Data Formats

ISO-11898, CAN1.0 ,CAN2.0 , Device Net

CAN Data Rate

0~1Mbps

Bit Error Rate

<1 x 10-12

Connectors

Data

Screw Block Terminal

Fiber

ST, SC or FC (ST fitted as standard)

Environmental

Operating   Temperature

- 3 0 C--- +70 C

Storage Temperature

- 40 C--- +85 C

Operating   Humidity

0- 95%

MTBF

>100,000 Hours

Optical

Fiber

Multimode or singlemode

Wavelength

MM: 850nm, SM: 1310nm

Number of fibers

2 or 1

Power

Power Input

AC   220V  110v or  DC+110V   +5V   +12V   +24V   +48V Option

Mechanical

Dimensions

125(L)×110(W)×36(H )Wall Mount & DIN Rail

 Model Selection:

Model Number

Description

Fiber No.

Fiber Mode

Fiber Connector

FO-FIB-100-P2M

Point to point Link,Dual Fiber, 2km

2

Multi Mode

ST/SC/FC

FO-FIB-100-P2S

Point to point Link,Dual Fiber, 20km

2

Single Mode

ST/SC/FC