The DeviceNet series products provide an optical point-to-point or bus network connection for DeviceNet data interfaces on one or two, multimode or singlemode optical fibers. The DeviceNet Point-to-Point Transmission units operate as the end or terminal points and provide an electrical connection and a two fibre optical connection. The units support CAN 1.0 and CAN 2.0 CAN standards, and CAN. And are transparent to all high level protocols.
This series is available in either wall mount, DIN rail or 3U chassis card configurations.
Product Features
- Up to 1Mbps data rate
- Multimode and singlemode
- Single fiber solution
- Wall mount, rack or chassis configurations
|
Data
|
|
Data Formats
|
CAN1.0 ,CAN2.0 , Device Net,CAN Open
|
|
CAN Data Rate
|
0~1Mbps
|
|
Bit Error Rate
|
<1 x 10-12
|
|
Connectors
|
|
Data
|
Screw Block Terminal
|
|
Fiber
|
ST, SC or FC (ST fitted as standard)
|
|
Environmental
|
|
Operating Temperature
|
- 3 0 C--- +70 C
|
|
Storage Temperature
|
- 40 C--- +85 C
|
|
Operating Humidity
|
0- 95%
|
|
MTBF
|
>100,000 Hours
|
|
Optical
|
|
Fiber
|
Multimode or singlemode
|
|
Wavelength
|
MM: 850nm, SM: 1310nm
|
|
Number of fibers
|
2 or 1
|
|
Power
|
|
Power Input
|
AC 220V 110v or DC+110V +5V +12V +24V +48V Option
|
|
Mechanical
|
|
Dimensions
|
125(L)×110(W)×36(H )Wall Mount & DIN Rail
|
Model Selection:
|
Model Number
|
Description
|
Fiber No.
|
Fiber Mode
|
Fiber Connector
|
|
HFB-FO-DEV-P2M
|
Point to point Link,Dual Fiber, 2km
|
2
|
Multi Mode
|
ST/SC/FC
|
|
HFB-FO-DEV-P2S
|
Point to point Link,Dual Fiber, 20km
|
2
|
Single Mode
|
ST/SC/FC
|
|
HFB-FO-DEV-M4M
|
Multi point Link,4 Fiber, 2km
|
4
|
Multi Mode
|
ST/SC/FC
|
|
HFB-FO-DEV-M4S
|
Multi point Link,4 Fiber, 20km
|
4
|
Single Mode
|
ST/SC/FC
|