CAN Bus Converters & Repeaters
CAN to Ethernet Converter(Gateway)
 

CAN to Ethernet Converter(BUE-CANET-I & BUE-CANET-II) 1.1 Product Overview Our CAN Bus to Ethernet(TCP/IP)  module converter  is  an intelligent  CAN bus communication  interface  that  is compatible  with  TCP/IP protocol and supports one or two CAN channel. Using this module will enable PC to connect to CAN-bus network via USB bus, forming…Read More 


CAN to TCP/IP Converter(ADAM Enclosure)
 

CAN to TCP/IP Converter(ADAM-CANET-I & ADAM-CANET-II) Our ADAM enclosure series CAN Bus to Ethernet(TCP/IP)  module converter  is  an intelligent  CAN bus communication  interface  that  is compatible  with  TCP/IP protocol and supports one or two CAN channel. Using this module will enable PC to connect to CAN-bus network via USB bus, forming the…Read More


RS232/485 to CAN Converter(Gateway)
 

Rs-232/485(Modbus) to CAN Bus Converter(BUE-CAN-SERIAL) The Rs-232/485 to CAN Bus Converter utilizes automatic bidirectional switching requiring no control signal. High efficiency, power & signal double isolated product. It can convert RS-232/S-485 system fit with CAN Bus system. Then we can use CAN realize RS-232/485 signal to further transmission. Support Can Bus…Read More 


CAN Fiber Optic Repeater
 

CAN Fiber Optic Repeater(HFB-FO-CAN) The CAN Bus series products provide an optical point-to-point or bus network connection for CAN bus data interfaces on one or two, multimode or singlemode optical fibers. The CAN Bus Point-to-Point Transmission units operate as the end or terminal points and provide an electrical connection and…Read More


CAN to PCI Interface(Adaptor)
 

One or 2 Channel Isolated PCI CAN Interface Cards Introduction: The PCI-CAN card is a Controller Area Network (CAN) interface card. It supports one or dual-port CAN's interface that can run independently or bridged at the same time. The built-in CAN controller of this card is Philips SJA1000, which provides bus arbitration and error…Read More



USB to CAN BUS Converter
 

USB to CAN BUS Converter(BUE-CAN-USB) CAN to USB is a very small dongle that plugs into any PC USB Port and gives an instant CAN connectivity. This means it can be treated by software as a standard COM Port (serial RS232 port) which eliminates the need for any extra drivers…Read More

CAN to RS-232/485 MB Converter(Supports SAE J1939 & Modbus RTU)

 

CAN to RS-232/485 MB Converter(Supports SAE J1939 & Modbus RTU)(B-UT-2505) Description: The Rs-232/485 to CAN Bus Converter utilizes automatic bidirectional switching requiring no control signal. Support Can Bus 2.0A/B,Modbus RTU,SAE J1939 protocol complying with ISO/DIS 11898 specification; High efficiency, power & signal double isolated product. It can convert RS-232/S-485 system fit…Read More 


CAN to RS-232 Adaptor,TTL Transparent Transmission
 

CAN to RS-232 Adaptor,TTL Transparent Transmission(BUE-CAN-ST) Description: RS-232 in DB9 female, CANBUS DB9 with Binding postBaud rate:300BPS-115.2KBPS. Size:63mmX33mmX17mmEnvironment:-40-85℃,Relative humidity:5-95%Distance:>1.2Km for CANBUS; 5m for RS232 Product Feature: No protocol conversion,no software,transparent transmission.Can be used for testing and some other not demanding sites.... Read More



CAN Repeater
 

CAN Bus Isolated Repeater(BUE-CAN-RP) The BUE Series CAN Bus Isolated Repeater utilizes automatic bidirectional switching requiring no control signal. This product can insulate CAN bus for a distance up to 10Km. This product enables equipment connections to the bus to be doubled. All upper levels protocol is supported. The Series…Read More



RS485 to CAN BUS Isolated Repeater
   

RS-485 to CAN Bus Isolated Repeater(BUE-CAN-485-RP) The Rs-485 to CAN Bus Isolated Repeater utilizes automatic bidirectional switching requiring no control signal. High efficiency, power & signal double isolated product. It can convert RS-232/S-485/RS-422 system fit with CAN Bus system. Then we can use CAN realize RS-485 signal to further transmission.…Read More



RS-485 to CAN Bus Isolated Repeater(BUE-CAN-485-RP) The Rs-485 to CAN Bus Isolated Repeater utilizes automatic bidirectional switching requiring no control signal. High efficiency, power & signal double isolated product. It can convert RS-232/S-485/RS-422 system fit with CAN Bus system. Then we can use CAN realize RS-485 signal to further transmission.…