Mode
Interface Converters

8 - Channel Analog Input

Eight 16-bit analog input channels of 0 – 10V input range. Internal hardware and software calibration capabilities. Programmable PGA of eight gains setting from 1x to 128x. Burn out current source for detecting open circuit and short circuit of the sensor... Read More

 

Analog to Serial Converter Modbus

The model PRO-AMOD-01 IS 4 to 20 / 0 to 10 v input to Modbus converter... Read More

 

RS232 TO Current Loop Converter(TTY)

The model PRO-CL-01 is high speed RS232 to current loop converter. This current loop

Converter is suitable for distances up to 1.2 km. Over two twisted pair. The model

Supports active as well as passive port. (dip switch selectable)... Read More

RS232 to RS485 converter

The model PRO-E-01 is high speed RS 232 to RS 485 converter supporting auto baud rate... Read More

 

Ethernet to RS 232 / RS 485 Converter(Port-01)

PRO-ET-01(Ethernet to rs232 / rs485 converter) is used to put devices on network so that

The remote devices can be made easily accessible through network communication... Read More

Ethernet to RS 232 / RS 485 Converter(Port-02)

PRO-ET-02 (Ethernet to rs232 / rs485 converter) is used to put devices on network so that

The remote devices can be made easily accessible through network communication.

It has 2 ports. Port1 & port2... Read More

ETHERNET TO RS232 / RS485 CONVERTER - 6 PORT

PRO-ET-06  (Ethernet to rs232 / rs485 converter) is used to put devices on network so that the remote devices can be made easily accessible through network communication.

It has 6 ports... Read More

 

 

 

RS232 ISOLATOR

PRO-I-01 is used for providing isolation to serial [rs232] interface. The optical isolation

Protects one segment of your network from problems that arises on the other... Read More

RS 422/485 ISOLATOR / REPEATER

The model PRO-R-01 is high speed RS 422/485 isolator (repeater). It boosts RS 422/485 signals

Up to 1.2 km. Over one or two twisted pair... Read More



 

USB TO RS232 CONVERTER (NON-ISOLATED)

The model PRO- U-01 is USB bus power, high speed USB  to rs232- converter. It supports auto baud rate... Read More


USB TO RS485 CONVERTER (NON-ISOLATED)

 The model PRO-U-02 is USB bus power, high speed, USB to rs485- (2 wire /4 wire) converter. It supports auto baud rate... Read More

 

USB TO RS232/RS485 CONVERTER (ISOLATED)

The model PRO-U-03 is USB bus power, high speed, USB to rs232 / rs485- (2 wire /4 wire)

Converter. It supports auto baud rate... Read More



 

USB TO RS232 CONVERTER (ISOLATED)

The model PRO-U-04 is USB bus power, high speed, and USB to rs232- converter. It supports auto baud rate... Read More

 

 

SERIAL TO WIRELESS CONVERTER

Wireless (xbee) is a serial to wireless converter} the xbee modules operate within the

Zigbee protocol and support the unique needs of low-cost, low-power wireless sensor networks... Read More