A great solution to interconnect MBus Devices on other protocol Networks like BACnet, Modbus, Lonworks, SNMP, Metasys N2, KNX and others.

Downloads Protocol Datasheets M-Bus Hardware Datasheets QuickServer M-Bus InformationSheet

• FieldServer M-Bus Gateways - a great solution to enable two way communication between:

1.     Between a M-Bus network/device and a different protocol network like BACnet, Modbus, Lonworks, SNMP, Metasys N2, KNX.

• FieldServer M-Bus Gateway models have multiple RS-485 ports, Ethernet ports and Lonworks ports (depending on the model). Hence it is possible to interconnect devices on different serial, Ethernet and Lonworks protocols together.

Popular combinations for KNX gateways

FieldServer Hardware platforms supporting M-Bus protocol

How to configure the FieldServer Gateway?

• We will configure the Gateway for you based on your requirement and support you during commissioning of the Gateway, so you do not  have to worry about configuring the FieldServer Gateway.
• However, it is very helpful to know how to configure the devices. All the required tools and supporting product manuals with be provided completely free of cost with your purchase.
• Configuration of the FieldServer is done using a '.csv' file. This file can be edited using any text editor (example Microsoft excel).
• In this file we need to enter information for the Client and Server side interfaces of the FieldServer. This includes but is not limited to:

1. Node ids of the slave devices
2. MSTP addresses/device address of the slave devices
3. Baud rate, parity, stop bits for serial communication
4. Scan rates

• And finally we need to create an internal mapping that would map each data value read on the client side to a data value on the server side.
• For detailed information on configuration please get in touch with us and review the configuration manual on top of this page